How to Remove Pedals from a Woom 2 Bicycle

Removing the pedals from a Woom 2 bicycle is a straightforward process that can be accomplished with minimal tools and effort. Woom bicycles are designed for kids, which means they are lightweight and user-friendly. However, proper maintenance, including pedal removal, is essential for ensuring the bike remains in good working condition. Whether you need to replace the pedals, perform maintenance, or pack the bike for travel, understanding the process of removing pedals is key. In this article, we will guide you through the steps of removing pedals safely and efficiently.

Tools Required

1. A pedal wrench (or a 15mm open-end wrench) 2. A 5mm Allen key (if the pedals have an Allen screw) 3. Some lubricant (optional, but useful if the pedals are stuck) 4. A cloth to wipe down any grease or dirt

Identifying the Right Pedal

Woom 2 bicycles have a specific mechanism for attaching pedals, so it’s vital to identify the left and right pedals correctly. The left pedal has a reverse thread, which means it tightens counterclockwise and loosens clockwise. The right pedal, however, follows the standard clockwise tightening and counterclockwise loosening.

Step-by-Step Guide to Removing Pedals

1. Prepare the Bicycle Start by placing the bicycle in a stable position. You may want to flip it upside down or use a bike stand to keep it secure while you work. This will give you easy access to the pedals.

2. Clean the Area Before proceeding with the removal, take a moment to clean the area around the pedals. Remove any dirt or grime that may have accumulated, as this could make the process easier and prevent debris from entering the pedal threads.

3. Loosen the Right Pedal Using your pedal wrench, grip the right pedal nut. Turn it counterclockwise until it begins to loosen. Keep in mind that it may require some force, especially if it hasn't been removed in a while. If it seems stuck, applying some lubricant can help break the seal.

4. Remove the Right Pedal Once you have loosened the right pedal enough, you can remove it with your fingers. Continue to turn it counterclockwise until it is entirely detached from the crank arm.

5. Proceed with the Left Pedal Now that the right pedal is off, repeat the same process for the left pedal. Remember to turn it clockwise to loosen it due to its reverse threading. Once it is sufficiently loosened, remove it by hand.

6. Inspect the Pedals and Crank Arms With both pedals removed, take the opportunity to inspect them for any signs of wear or damage. Check the crank arms as well to ensure there are no issues that need addressing. This is also a great time to clean those areas thoroughly.

7. Storage or Replacement After you've removed the pedals, you can either store them safely or replace them with new ones. Make sure to keep the screws and washers in a safe place if you plan to reinstall the pedals later.

Reinstallation Tips

If you are planning to reinstall pedals, remember that the right pedal should be threaded in clockwise, and the left pedal should be threaded in counterclockwise. It is essential not to cross-thread the pedals, as this can damage the crank arm. Tighten them securely, but avoid overtightening, which could lead to complications.

Conclusion

The process of removing pedals from a Woom 2 bicycle is an essential skill for bike maintenance, and following the steps outlined above will ensure the job is done right. By keeping your bicycle in good condition, you enhance both its performance and longevity. Whether you are changing pedals or simply performing routine maintenance, this knowledge will empower you to care for your child's bike effectively. Happy cycling!